- Home
- Aqualabo
- Water Quality Water Quality Sensors
- Monobloc pH Sensor
![Monobloc PH Sensor](https://aqualab.com.au/wp-content/uploads/2024/07/MonoblocPH.jpg)
Monobloc pH Sensor
Digital pH Sensor Monobloc
The Monobloc pH sensor delivers measurements of pH, redox potential and temperature. Waterproof, compact and robust it offers a modbus RS485 communication for seamless integration.
Advantages:
Combined sensor: pH, Redox & Temperature
Measurement ranges: pH: 0.00 to 14.00 pH; Redox: – 1000 to + 1000 mV; T°C: 0°c to + 50.00°C
Digital communication Modbus RS-485
Assets:
Open communication protocol (MODBUS RTU RS485 or SDI12)
Sensor with very low energy consumption
- FEATURES
-
- Calibration involves adjusting the sensor readings to a known standard. pH sensor calibrates at up to 5 points, although common applications require only 2 or 3 calibration points. ORP is calibrated at 2 points. The values of all the calibration points for both parameters are user selected. This allows the PHEHT sensor to be calibrated to values close to the expected working level, increasing accuracy for a specific application.
- Engineered for handheld and in situ use, the pH/ORP probe excels in challenging conditions, offering quick response, minimal flow dependence, and low power consumption.
- Cleansing is performed by immersing the electrode in a special cleaning solution. The electrode must be kept clean, and the calibration checked regularly and adjusted over time. When the electrolyte is depleted (typically in 12 to 18 months), simply swap the replaceable cartridge with a new one and you are good to go!
- The probe uses the open and universal Modbus RS485 protocol, allowing easy connectivity with a range of devices, including dataloggers, controllers, PLCs, and remote systems.
- Downloads
-
Brochures pH Sensor Monobloc Brochure AUS
pH-Sensor-Monobloc-Brochure-AUS.pdfDownload now Manuals User manual PHEHT monobloc sensor
User-manual-PHEHT-monobloc-sensor.pdfDownload now