Flurometers

Turner Designs

CP6

Internal memory storage capacity combined with an external submersible lithium ion battery allow the C6P™ to run during extended or short-term deployments. Each C6P™ comes with a factory-installed temperature sensor. Optional factory-installed depth sensors and mechanical wipers are also available. The durable delrin housing is highly resistant to harsh environments. C-Soft Windows™ based software allows for intuitive calibration, datalogging set-up and file management capabilities as well as data integration.

FEATURES

Features:

  • One, Two, Three, Four, Five or Six Optical Sensors
  • Temperature Sensor Included
  • Optional Depth Sensor
  • Optional 3-Brush Mechanical Wiper
  • All Plastic Housing
  • Robust Memory – Over 60,000 Data Lines!
  • Easy to Use Software with Data Management Capabilities
  • Optional Antifouling Copper Plate
  • Optional Integration Firmware
Specs

• Specifications

Application Minimum Detection Limit Linear Range
CDOM/FDOM 0.15 ppb**
0.5 ppb***
0-1250 ppb**
0-5000 ppb***
Chlorophyll in vivo
  Blue Excitation
Red Excitation
0.025 μg/L
0.5 μg/L
0-500 μg/L
>500 μg/L
Fluorescein Dye 0.01 ppb 0-500 ppb
Oil – Crude 0.2 ppb*** 0-2700 ppb***
Oil – Fine 10 ppb*
10 ppm****
6,000 ppb*
>100 ppm****
Optical Brighteners 0.6 ppb*** 0-15,000 ppb***
Phycocyanin
(Freshwater Cyanobacteria)
2 ppbPC 0-3500 ppbPC
Phycoerythrin
(Marine Cyanobacteria)
0.15 ppbPE 0-750 ppbPE
PTSA Dye 0.1 ppb*** 0-650 ppb***
Rhodamine Dye 0.01 ppb 0-1000 ppb
Tryptophan for Wastewater Monitoring 3 ppb 1000 ppb
Turbidity 0.05 NTU 0-1000 NTU



* 1,5 Napthalene Disulfonic Disodium Salt
** Quinine Sulfate
*** PTSA (1,3, 6, 8 – Pyrenetetrasulfonic Acid Tetrasodium Salt)
**** BTEX (Benzene, Toluene, Ethylbenzene, Xylenes)
PC Phycocyanin pigment from Prozyme diluted in Deionized water
PE Phycoerythrin pigment from Prozyme diluted in Deionized water

C6P Physical Specifications
Weight in Air 2.54 kg; 5.6 lbs
Length 27.43 cm; 10-8 in
Diameter 13.84 cm; 5.25 in
Material Delrin Plastic
Temperature -2 to 50 degrees C
Depth 0 to 600 meters


C6P Electrical Specifications
Output Digital (ASCII)
Interface RS232 Interface
Minimum Sample Interval 1 Second
Minimum Power Supply 8 to 30 volts; 5 watts
Maximum Current Draw at 12 volts
– operational
– sleep mode
300 mA
3 mA


Downloads

Brochure

Download

Manual

Download

Additional

Have Question About This Product?