- Home
- Turner Designs
- Handheld comms
- DataBank Logger

DataBank Logger
Data can be stored and downloaded to a PC. Sensor calibration is simplified through continuous sensor readings with results graphically displayed. Sensor power is provided directly from the DataBank which is powered by internal rechargeable batteries, an external 9-30VDC power source such as a 12V marine battery, or AC power. Available in two configurations: a handheld package for easy transport during mobile field studies and an enclosure for long-term stationary field deployment.
- FEATURES
-
- Stores up to 9,999 records and 16 calibrations
- Includes auto-gain function
- Simplifies sensor calibration
- Station provides protection against corrosion, windblown dust and rain, water splash-down
- Works with Cyclops-7™ Submersible Sensors
- new Works with C-sense™ pCO2 Sensors
- Specs
-
DataBank Electrical Specifications Selectable Voltage: Software selectable 3 to 12 volts Sensor Current: 150 mA at 3V to 100 mA at 12V Parameters Warm-up Time: 0-25 seconds
Gain: 1-4Inputs Input Selection: Switch; Differential Voltage, Differential Current or Dual Current
Range: 0-5V or 0-25 mA
Resolution: 12 bits
Sampling Rate: 1000 Hz (bursts); groups of bursts re-averaged @ 30 HzOutputs Two, Open Drain, up to 200 mA @ 15V max
(Used primarily for gain selection)Storage Non-Volatile, 1280 Kb
(9,999 records, 1 record = sensor reading, date, time and location)Current Draw Computer: < = 45 mA (at full charge). Sleeping < 20 uA
LCD Backlight: Full power ~ 30 mA. Low Power ~ 15 mABattery Type: NiMH rechargable, 4.8 volts, 4,000 mA/Hr.
Life: Continuous up to 70 hours (dependant on sensor/settings)
Note: When using the DataBank with the C-sense, it is recommended that the voltage be set to 6 and the warm-up time be set to 3 minutes. Using these settings with a 5 minute sampling interval, you can expect a fully charged DataBank to collect 300 samples.Charge Time ~3 hours (for a fully discharged battery; ambient @ 25 degrees C) Communications USB
Handheld DataBank Physical Specifications Size Main body: 4.6″W x 3.2″H, x 3.4″D, Handle: 4.8″ long
(117mm W x 81mm H x 86 mm D, Handle: 122mm)
Overall: 11”H (279 mm H) with handle, strain-relief and connector.Weight 1.7 lb. (.76 kg) w/o pigtail
DataBank Station Physical Specifications Size 8.27”W x 8.27”H x 5.12”D (210 mm W x 210 mm H x 130 mm D) Weight 3.45 lb. (1.56 kg) w/o pigtail Enclosure Approximates IP66 & NEMA 4x
Dessicant provides quick indication of moisture intrusion
Cyclops-7 Performance Linearity 0.99R2
Application Minimum Detection Limit Dynamic Range CDOM/FDOM 0.15 ppb**
0.5 ppb***0-1250 ppb**
0-5000 ppb***Chlorophyll in vivo
Blue Excitation
Red Excitation0.025 μg/L
0.5 μg/L0-500 μg/L
>500 μg/LFluorescein Dye 0.01 ppb 0-500 ppb Oil – Crude 0.2 ppb*** 0-2700 ppb*** Oil – Fine 10 ppb*
10 ppm****>10,000 ppb*
>100 ppm****Optical Brighteners 0.6 ppb*** 0-15,000 ppb*** Phycocyanin
(Freshwater Cyanobacteria)2 ppbPC 0-40,000 ppbPC Phycoerythrin
(Marine Cyanobacteria)0.15 ppbPE 0-750 ppbPE PTSA Dye 0.1 ppb*** 0-650 ppb*** Rhodamine Dye 0.01 ppb 0-1000 ppb Tryptophan 3 ppb >20,000 ppb Turbidity 0.05 NTU 0-3000 NTU
* 1,5 Napthalene Disulfonic Disodium Salt
** Quinine Sulfate
*** PTSA (1,3, 6, 8 – Pyrenetetrasulfonic Acid Tetrasodium Salt)
**** BTEX (Benzene, Toluene, Ethylbenzene, Xylenes)
PC Phycocyanin pigment from Prozyme diluted in Deionized water
PE Phycoerythrin pigment from Prozyme diluted in Deionized water
Cyclops-7 Physical Dimensions Length x Diameter 5.7″ x 0.9″; 14.48 x 2.23 cm (SSt or Ti)
5.7″ x 1.25″, 14.48 x 3.18 cm (Delrin)Weight 5.0 oz; 142 grams
Cyclops-7 Environmental Characteristics Temperature Range Ambient: 0 to 50 deg C
Water Temp: -2 to 50 deg CDepth Range 600 meters Signal Output 0 – 5 VDC Supply Voltage Range 3 – 15 VDC
- Downloads
-
Brochures brochure-35.pdf Download now Manuals DataBank-Manual.pdf Download now Additional files additional-29.pdf Download now