Diver-SDI

Diver-SDI is a SDI interface module for Diver Dataloggers.

Diver-SDSI can be used to connect Divers to remote monitoring systems using SDI protocols. It features a barometric sensor, which can be used to convert pressure values into water level.

A typical SDI-12 system is depicted in the figure below. In the schematic two Diver-SDI modules are connected to a SDI-12 recorder, via a 3-wire SDI-12 bus which also include the power supply of 12 Volt. On the other end a Diver cable (AS2xxx) is attached to connect the Diver-SDI to a Diver. Diver cables up to a length of 500 meter can be used with the Diver-SDI.

Diver-SDI

Diver-SDI: Diver Family

The Diver SDI module is compatible with all members of the Diver family including:

• TD-Diver
• Baro-Diver
• CTD-Diver
• Cera-Diver
• Micro-Diver

See the source image

Cable options

Each Diver SDI module required a MDC cable to facilitate communication. The following MDC cables are available:

• 1m MDC data cable
• 2m MDC data cable
• 3m MDC data cable
• 4m MDC data cable
• 5m MDC data cable
• 7m MDC data cable
• 10m MDC data cable
• 15m MDC data cable
• 20m MDC data cable
• 30m MDC data cable
• 40m MDC data cable
• 50m MDC data cable
• 60m MDC data cable
• 80m MDC data cable
• 100m MDC data cable
• 150m MDC data cable
• 200m MDC data cable
• 250m MDC data cable
• 300m MDC data cable

TD Diver Cable

This product is manufactured by Van Essen and proudly represented by Aqualab Scientific.

FEATURES

Features
• The Diver SDI module has a built-in pressure and temperature sensor for measuring real-time air temperature and atmospheric pressure.
• Automatic barometric compensation of the Diver pressure readings.
• Dynamic density compensation for accurate water levels in saline conditions when used in combination with the CTD-Diver.
• External power supply through SDI-12 system.

Benefits
• No need for additional sensors to measure air temperature and atmospheric pressure.
• No need for post-processing the pressure data.
• Accurate water levels when water density varies due to salt content.
• No internal battery is required.
• The compact Diver SDI module can be mounted inside the well casing for long-term, uninterrupted use.

Specs

General

Supply voltage Standby current Protection classification Dimensions	external 8 to 16 Volt 50 µ IP66 65— 50— 35 mm (excl cable glands)

SDI-12 Bus

SDI-12 compatibility Multi-drop Address	SDI-12 version 1.4 yes, up to 8 Diver-SDI user programmable

Barometric Sensor

	Value	Unit
Pressure range	400…1100	cmH2O
Pressure accuracy	±2.0	cmH2O
Temperature range	-20 .. +80	°C
Temperature accuracy	±1.0	°C

Models

Available models include:

Diver-SDI for Diver Dataloggers (SDI-12)
Product number# 11.11.80.01

Downloads

Brochures
	Diver-SDI Product Brochure (AUS) Diver-SDI-Tech-Sheet-AUS.pdf	Download now
	Diver Family Brochure (AUS)	Download now
Manuals
	Diver-SDI User Manual Diver-SDI-Manual.pdf	Download now
Additional files
	Diver Accessories (AUS) Diver-Accessories-AUS.pdf	Download now

Optional Accessories