Water Level Sensors

Van Essen

Diver-MOD

Diver-MOD

Diver-MOD is a MODBUS interface module for Diver Dataloggers.

Diver-MOD can be used to connect Divers to an RS485 network using the MODBUS /RTU protocol.  It features a barometric sensor, which can be used to convert pressure values into water level.

A typical MODBUS configuration is depicted in the figure below.  In the schematic two Diver MODBUS modules are connected to a PC/PLC.  This connection includes both data communication and power.  The maximum MODBUS cable length depends on the baud rate, the cable, the network configuration (2-wire or 4-wire), etc.  A maximum length of 1000 meters can be achieved using the right components.

 

Diver-MOD Schematic

 

Diver-MOD: Diver Family

The Diver MODBUS module is compatible with all members of the Diver family including:

• TD-Diver
• Baro-Diver
• CTD-Diver
• Cera-Diver
• Micro-Diver

 

See the source image

 

Cable options

Each Diver MODBUS module required a MDC cable to facilitate communication. The following MDC cables are available:

• 1m MDC data cable
• 2m MDC data cable
• 3m MDC data cable
• 4m MDC data cable
• 5m MDC data cable
• 7m MDC data cable
• 10m MDC data cable
• 15m MDC data cable
• 20m MDC data cable
• 30m MDC data cable
• 40m MDC data cable
• 50m MDC data cable
• 60m MDC data cable
• 80m MDC data cable
• 100m MDC data cable
• 150m MDC data cable
• 200m MDC data cable
• 250m MDC data cable
• 300m MDC data cable

TD Diver Cable

 

Van Essen Logo

This product is manufactured by Van Essen and proudly represented by Aqualab Scientific.

FEATURES

Features
• The Diver-MOD has a built-in pressure and temperature sensor for measuring air temperature and atmospheric pressure readings.
• Read Diver memory.
• Program the Diver sample interval.
• Start and stop Diver.
• Power is supplied by the Modbus network.

Benefits
• No need for additional sensors to measure air temperature and atmospheric pressure.
• No need for post-processing the pressure data.
• No internal battery is required.

Specs

Diver-MOD Specifications

Models

Available models include:

  • Diver-MOD for Diver Dataloggers (MODBUS)
    Product number# 11.11.80.02
Downloads
Brochures
Diver-MOD Product Brochure (AUS)

Diver-MOD Product Brochure (AUS)

Diver-MOD-Tech-Sheet-AUS.pdf
Download now
Diver Family Brochure (AUS)

Diver Family Brochure (AUS)

Download now
Manuals
Diver-MOD User Manual

Diver-MOD User Manual

Diver-MOD-AS339-ProductManual-en.pdf
Download now
Additional files
Diver Accessories (AUS)

Diver Accessories (AUS)

Diver-Accessories-AUS.pdf
Download now
Optional Accessories
  • 1m MDC data cable
    Product number# 11.11.48.00
  • 2m MDC data cable
    Product number# 11.11.48.00.02
  • 3m MDC data cable
    Product number# 11.11.48.00.03
  • 4m MDC data cable
    Product number# 11.11.48.00.04
  • 5m MDC data cable
    Product number# 11.11.48.01
  • 10m MDC data cable
    Product number# 11.11.48.02
  • 15m MDC data cable
    Product number# 11.11.48.03
  • 20m MDC data cable
    Product number# 11.11.48.03.01
  • 30m MDC data cable
    Product number# 11.11.48.04
  • 50m MDC data cable
    Product number# 11.11.48.04.01
  • 60m MDC data cable
    Product number# 11.11.48.05
  • 80m MDC data cable
    Product number# 11.11.48.06
  • 100m MDC data cable
    Product number# 11.11.48.07
  • 150m MDC data cable
    Product number# 11.11.48.XX
  • 200m MDC data cable
    Product number# 11.11.48.08
Videos
  • Diver Overview
  • Introducing Diver Office (2020)

Have A Question About This Product?