TSS Portable Handheld Meter (Turbidity/TSS)
TSS Portable Handheld Meter (Turbidity/TSS)
TSS Portable Hand-held Turbidity, Suspended Solids, and Sludge Blanket Level Instrument
Compact instrument for analytical determination by continuous measurement mode with integration time setting.
Adjustment of up to 5 measuring points, storage of measuring values with name, date and time. Shockproof.
Combined multiple beam alternating light method with infrared diode system and beam focusing; wavelength 860 nm. The measurement ranges for turbidity and suspended solids are: 0.001 – 9999 FNU and 0.001 – 400 g/L respectively.
Three Parameters in One Instrument
The Hach TSS Portable Hand-held Turbidity, Suspended Solids, and Sludge Blanket Level Instrument’s unique multi-beam alternating light method with infrared diode system gives it a broad measuring range for both turbidity and suspended solids in one portable handheld instrument.
Multiple Calibration Curves for Convenience
It stores up to four different calibration curves for suspended solids and one for turbidity. There’s no need for constant re-calibration for different locations or types of sludge.
Easy Sludge Blanket Levels
The sludge blanket level can be measured by setting the units to mg/L, g/L or percent. Calibrate the instrument and then slowly lower the sensor into the clarifier. The suspended solids concentration will significantly increase as it reaches the sludge blanket level. Once the blanket level is reached, examine the sensor cable which is marked every meter to determine the sludge blanket level depth from the water surface.
Air Bubble Compensation for Accuracy
The instrument software automatically compensates for air bubbles to prevent its influence on the measurement. Turbidity is pre-calibrated with a calibration curve stored in the instrument. For suspended solids, each of the calibration curves can be closely adjusted to the laboratory results because each calibration curve can use up to three points per curve plus a zero value.
Durable Materials for Long Life
The probe is made of polished stainless steel with a scratch-resistant sapphire window to withstand harsh environments. Polished stainless steel helps keep particles from sticking to the surface of the probe. The internal memory stores up to 290 measuring values, including time, date, measurement, location, and homogeneity. Three operating modes are available: single, interval, or continuous.
Cable Length 10 m cable with marks for distance Current Input Approx. 60 mA Diameter 40 mm DimensionsCase L: 450 mm (17.7 in)Meter (H X W X D): 110 x 230 x 40 mm (4.33 x 9.06 x 1.57 in.)Probe (Ø X L) 40 mm x 29 cm (1.57 x 11.42 in.) Display Alphanumerical display, 4 rows of 16 characters Kit? Yes Length 290 mm Material Sensor Body: stainless steel Measurement Modes Continuous measurement, integration time settings 0 – 1000 seconds Measuring Principle Combined multiple beam alternating light method with infrared diode system and beam focusing.;
Turbidity: 2-channel 90° scattered light measurement in accordance with DIN/EN 27027/ISO 7027; additional measurement value verification through six-channel multiple-angle measurement; Solids: Modified absorption measurement; six-channel multiple-angle measurement
Measuring Range TSS 0.001 – 400 g/L (upper range depending on sample characteristics) Measuring Range Turbidity 0.001 – 9999 FNU Memory Up to 290 measuring points Operating Pressure 0 to 10 bar (0 to 145 psi) Operating temperature range 0 – 60 °C Power Automatic shut down after 4 minutes (if no button has been pressed and no permanent measurement is activated) Precision Suspended Solids < 4 % ± 0.001 g/L , whichever is greater Precision Turbidity < 3 % or ± 0.02 NTU , whichever is greater Pressure Range Max. 10 bar Protection Class Probe IP68; Control unit IP 55 Range TSS 0.001 – 400g/L
Turbidity 0.001 – 9999 FNU
Relative Humidity 0 – 95 % ResolutionSuspended Solids: 0.01 at 1 – 9.999 g/LSuspended Solids: 0.1 at 10 – 99.9 g/LSuspended Solids: 1 at greater than 100 g/L Resolution turbidity0.001 @ 0 – 0.999 NTU0.01 @ 1 – 9.99 NTU0.1 @ 10 – 99.9 NTU1 at greater than 100 NTU Sensor Cable 10 m Warranty 12 months Weight Probe: 3.5 lbs (1.6 kg); Meter: 1.2 lbs (0.54 kg) Wetted Materials Probe: stainless steel
Sensor Window: sapphire
What’s included? Turbidity, Suspended Solids and Sludge Level probe, meter, rechargeable batteries, user manual, carrying case
Please note the battery charger is not included
Width Meter: (9.1 in) Width 2 Case: 450 mm (17.7 in)
Various TSS models are available depending on your requirements.
Please consult with Aqualab before ordering.
Available models include:
TSS Portable Hand-held Turbidity, Suspended Solids, and Sludge Level System
Product number# LXV322.99.00002
- TSS Portable Hand-held Turbidity, Suspended Solids, and Sludge Level System